For seamless asbestos roof encapsulation, no other roofing company compares to GLS Coatings
Extend the lifespan of your leaking asbestos roof
Our asbestos roof coatings are TOUCH-DRY in UNDER 10 SECONDS and stops your leaks IMMEDIATELY!
CALL US NOW ON 0800 231 5260
Our asbestos roof coatings structurally improves the whole roof
GLS Coatings are experts in the application of asbestos roof encapsulation systems.
Our asbestos roof coating provides a cost-saving solution WITHOUT disturbing your asbestos cement sheet roof. By encapsulating your existing roof with our Specialist Spray-applied protective coatings, we add decades to the life of your roof and improve its structural soundness.
Benefits of GLS Roof Coatings For Asbestos Encapsulation:
There is NO disruption to your business. As we don’t remove the asbestos roof, you can continue working.
Our specialist asbestos roof coating structurally improves the whole roof.
Much cheaper than removing the asbestos and having a new roof.
Our asbestos roof coatings are VOC-free and environmentally friendly.
Comes with a 25-year Guarantee.
The asbestos roof coating provides a totally weather resistant surface which withstands extreme temperatures. AND it can be applied in all temperatures, from -50°C to 120°C.
It's worth remembering that buildings move all the time, particularly large-scale industrial ones. Our asbestos roof coatings are designed to have enough flexibility to adapt and shift with these movements, ensuring your roof remains sealed and water-tight, despite the weather. Our Specialist Roofing System has 340% elongation properties – so you know you are protected from cracks and movement.
We have saved our customers £1000's encapsulating leaking commercial asbestos roofs throughout the UK.
GLS Coatings' professionalism and performance to the tasks in hand was exceptional. From the initial meeting and planning the work to the operatives onsite and the QA procedures undertaken during and after. I cannot fault GLS and would happily employ them again.
Gareth Griffiths Project Manager - AMCO Giffen
GLS were recommended to us by Network Rail as their preferred supplier for their coatings. This alone speaks highly enough, because I know the hoops they have had to jump through to get where they are today and well deserved.
Steve Lee Keltbray - Senior Construction Manager
Preparing the substrate on the Asbestos Roof
Applying the Structural Stabilising Layer to the Asbestos Roof
Applying Advanced Waterproofing Layer to the Asbestos Roof
GLS Coatings’ spray-applied seamless asbestos encapsulation for roofs are TOUCH-DRY in UNDER 10 SECONDS and stops your leaks IMMEDIATELY!
There are strictly enforced regulations which must be complied with, even if you only want to replace a couple of asbestos cement roofing panels. So DON’T replace them – GLS Coatings have the answer…
Call us on today on 0800 231 5260 or complete the contact form below for your FREE no obligation site survey and quotation.
Thank you for your enquiry, one of our team will be in contact shortly to discuss your requirements.
The THREE Stages to GLS Coatings’ Asbestos Roof Encapsulation System
Stage One - Cleaning the Asbestos Roof
First, using low-powered hand-pumped sprays, we apply an environmentally-friendly biocide to the roof to kill all of the moss and algae.
Once the moss and algae have been treated, our UKAT Category B Accredited Technicians, wearing full PPE, PICK OFF the moss by hand and place it in the legally compliant double-bagged and labelled Asbestos bags, which are tightly sealed.
Waste containing more than 0.1 per cent asbestos is classed as hazardous/special waste, so any waste that contains asbestos, or is contaminated with asbestos, must be double-bagged and placed in a covered, locked skip. This includes overalls, over-shoes, sampling wastes and respiratory protection equipment that have come into contact with asbestos.
The bags containing the moss and algae are then placed in a lockable compartment in our vehicle and returned to base. Finally, our Hazardous Waste Contractors take the bagged moss and algae to an Approved Hazardous Waste Disposal Site. And, of course there is full paperwork, proving Duty of Care and full compliance.
Stage 2 - Applying the Structural Stabilising Layer to the Asbestos Roof
This stabilising layer is spray-applied under high pressure and it fills any small voids or cracks, before expanding and setting to form a lightweight layer – sealing the whole roof.
It also secures any loose or broken fixings, which are common on old asbestos roofs.
Stage 3 - Applying Advanced Waterproofing Layer to the Asbestos Roof
Finally, a technologically advanced waterproof barrier is applied over the structural stabilising layer. Using the latest chemical technology, this layer is spray-applied and forms a complete, seamless coating over the entire roof area.
Want to know more our Asbestos Encapsulation Roof Coatings? Call - 0800 231 5260
For FREE commercial asbestos roof repair advice, just get in touch and we will be pleased to help.
Duty of Care for non domestic premises to manage asbestos
The duty to manage asbestos is directed at those who manage non-domestic premises: the people with responsibility for protecting others who work in such premises, or use them in other ways, from the risks to ill health that exposure to asbestos causes.
take reasonable steps to find out if there are materials containing asbestos in non-domestic premises, and if so, its amount, where it is and what condition it is in
presume materials contain asbestos unless there is strong evidence that they do not make, and keep up-to-date, a record of the location and condition of the asbestos- containing materials – or materials which are presumed to contain asbestos
assess the risk of anyone being exposed to fibres from the materials identified
prepare a plan that sets out in detail how the risks from these materials will be managed
take the necessary steps to put the plan into action
periodically review and monitor the plan and the arrangements to act on it so that the plan remains relevant and up-to-date
provide information on the location and condition of the materials to anyone who is liable to work on or disturb them
Health and Safety is at the forefront of everything we do at GLS Coatings.
We are Members of the British Safety Council and safeguarding the health, safety and wellbeing of our Staff, Clients and Members of the Public is at the heart of everything we do.
When it comes to asbestos – we take no chances and are fully compliant with The Control of Asbestos Regulations 2012. Our Technicians all hold the UKATA Certificates for Non-Licensable Work with Asbestos, Asbestos Awareness Training, Working at Height, PASMA Training for the Safe Erection and Operation of Mobile Scaffolding, IPAF Mobile Elevating Work Platforms.
‘Asbestos still kills around 5000 workers each year – this is more than the number of people killed on the road, with around 20 tradesmen dying each week as a result of past exposure.’ Source: Health & Safety Executive.
But asbestos isn’t just a thing of the past – it can still be found in any building that was built or refurbished before 2000.
It is easy to see why asbestos was hailed as being a brilliant solution for the building trade – it has many applications from lining airing cupboards to providing durable asbestos cement roofs which have lasted for decades.
However, many of these roofs are now failing and letting in water. Yet it is an extremely costly business to over-clad or replace an asbestos cement roof, with the possibility of the release of harmful asbestos fibres.
This is where GLS Coatings Asbestos Encapsulation System proves extremely cost-effective – WITHOUT disrupting the business.
GLS Coatings Asbestos Encapsulation System is the safest method of fixing your asbestos roof. This is because our Asbestos Encapsulation System prevents the further release of harmful asbestos fibres into the air. With no disturbance to the asbestos, work can be completed quickly with
Other services you may be interested in
Floor Coatings - Can take light foot traffic immediately and come with a 20 year+ manufacturer's warranty
Our industrial polyurea coatings are economical, stronger, quicker, and less disruptive to install than conventional flooring applications. GLS Coatings' floor coatings provide a return to service time, unrivalled by any other system.